Contact us

  • Add:NO.2588 Longwu Road,
            Xuhui District, Shanghai
  • Tel:+86-21-34686835 
  • Fax:+86-21-34686835
Home>>news>>How to Remove Stumps With a Used Excavator

How to Remove Stumps With a Used Excavator


A used excavator can reduce your time in 50 % when to remove a stump with used excavator. Stumps are a genuine discomfort in the neck to get rid of, particularly if you're working with the remnants of a big tree. If all you have are a shovel and a choose, the process gets even much more tough. Making use of hand resources, you'll most likely be drenched in sweat and have blisters forming on your arms prior to the profession is accomplished. In comparison, a used excavator or backhoe will make your stump elimination a breeze. As consistently, when using heavy gear, observe the security precautions outlined in your handbook.

Placement your used excavator close to the stump you desire to get rid of. You do not, even so, want to be too near, as you should dig a trench close to the perimeter of the stump. Dig the trench a couple of ft aside from the edge of the stump and close to its perimeter. If it's a bigger stump with a much more extensive root method, dig the trench even more aside. The much more roots you're capable to expose by digging aside from the stump, the less difficult it will be to take the stump out of the soil. Proceed your used excavator, if needed, in purchase to dig the trench all the way close to the perimeter of the stump.

Try to move the stump. You can do this by bracing the bucket versus the stump and pushing or by hooking the edges of the bucket under subjected stump. With the edge of the bucket under the stump, you can attempt to lift or pry the stump loose. A big or particularly stubborn stump might not budge at earliest. Carry on digging a small tad at a time till the stump is noticeably loose. Use the bucket of the used excavator to reduce via any roots that get in the way. If needed, get away the used excavator and use a big landscape bar to reduce via the roots and pry under the stump.

Hook the edge of your used excavator's bucket below the stump when once again. With the edge of the bucket under the stump, you will need to be capable to lift the bucket and scoop the stump out of the hole. If you desire, you can also lash a chain close to the stump and attach it to the bucket of the used excavator to lift the stump out of the soil. Haul the stump aside or use your used excavator to dig a big hole in which to bury the stump. Use the used excavator to refill the stump hole with soil.

Guidelines & warnings
Do not attempt to get rid of a stump if the soil is wet. Making use of an used excavator, you'll most likely ruin the yard by making ruts in the soil or tearing up the grass. Wait around till it's dried out to start digging. Do not attempt to bury the removed stump in a wetland region.