news

Contact us

  • Add:NO.2588 Longwu Road,
            Xuhui District, Shanghai
  • Tel:+86-21-34686835 
         Jackie:13916676968 
         Judy:15901623585            
  • Fax:+86-21-34686835
Home>>news>>You should Operate a Mini used Excavator well

You should Operate a Mini used Excavator well

Tags: excavator machinery micro excavators for sale2014-02-14

To Have the used excavator delivered, or you can arrange to choose it well from the rental trade if you let a truck to access with a big duty trailer. One advantage of a mini used excavator is that it can be shuffled on a trailer using a good enough a little truck, made the total weight of the used excavator and trailer do not surpass the truck's capacity. Find a level, clear place to try the machine out in. Minis are good, with a very good balance and comparatively wide footprint for you should know that is their size, but it may out of your thinking they can be overturned, so start out on steady, level place.

Take a look around the used excavator to see if there are any loose parts or any damaged parts that will make working it endangered. You can find out the oil leaks, and there are other things you can do, such as linkages, damaged tracks, you should know that other fluids dripping, and lose control cables and there are other problems which you cannot find it. And you can also find you're the location where your fire extinguisher are and see the engine lubricant and coolant lines. These are a lot of good working routines for using any kind of construction tool, so you can make a good habit of giving any tool you can work, and there is an important thing you can use a lawnmower well and you should know that use a bulldozer well over before to crank it.

Then Mount your machine. You will find that you should know it, it is the arm rest, or called control fabrication on the left location, just from the workingman's seat of the used excavator, so you can flips up and what is important that is out of the way to access the seat. After being seated, then you can do one thing is pull back down the left armrest, and push the release lever then to lock it into the ground. Sit in the workingman's seat and to look around to make familiar between yourself with the controls, counters, and in the workingman's suppression system. You should notice one thing is that, to see the ignition key on the control board on the right side, or processing on your right. You can make a mind paper to pay attention on the temperature of the engine, oil pressure, and fuel level while you are working with the tool. The belt of seat is there to make you safe inside the used excavator's roll cage if it down or tip over. You can Use it.

You can Grip the joysticks, and you can move them around a bit, to feel their motion. These sticks ,you have to know that ,they can control the many settings, also very good as the hoe and the used excavator spin function, which swings the high part of the used excavator around when worked. These sticks will always return to a nonaligned place when they are set free as from duty, stopping any active movement which is you have to know, it is caused by their use