news

Contact us

  • Add:NO.2588 Longwu Road,
            Xuhui District, Shanghai
  • Tel:+86-21-34686835 
         Jackie:13916676968 
         Judy:15901623585            
  • Fax:+86-21-34686835
Home>>news>>Several Ways for You to Know Bucket Tooth Installation Process

Several Ways for You to Know Bucket Tooth Installation Process

Tags: used compact excavators the best excavators used excavators for sale in us2013-09-29

It is important for you to know the details of used excavator bucket tooth installation. In the process, you know, the entire tooth bar need to be replaced and removed in correct ways. With the development of our todays technology and society, the excavators are found in diverse types, such as used Caterpillar excavators, Volvo excavators and others. To operate and maintain them well, the bucket tooth is very important.

The steps are following. At first, you should put on the protective equipments, such as safety glasses and safety toed boots. All of the equipments are supposed to be installed properly. Make sure the teeth of bucket parallel to the ground. Then to use jack stands or wooden blocking to support the bucket. This helps to prevent any potential pinching or crushing accidents. Then you are told to set the parking brakes and make the loader turned off.

No matter they are used Sumitomo excavators or other type machines, a series actions, such as removing excess dirt and tapping out the tooth keeper pin should be done by you. Also you are told to remove the worn tooth from the tooth shank. If the tooth does not come loose by hand, then apply a few taps with certain sledge hammer. Next step is to remove any remaining dirt from the tooth shank with the wire bristle brush.

What you should do next is to slide the new tooth onto the tooth shank until the pinholes align. Then tap the keeper pin into places with the hammer and the keeper pin punch. Once the pin seats, stop hammering. Most importantly, to ensure the new tooth is mounted securely by giving it a few gentle taps with the hammer. if it does not move, the tooth can be installed absolutely.

The used excavator bucket tooth installation process can be very important to keep a normal working station. Having said for more than one time that the excavators are very helpful for diverse applications. With the advanced Internet, they gain more popularity around the world. If you have a need, then to visit the website: www.usedexcavator-china.com

Other used excavator products, please click in:

Used Sumitomo Excavator SH 330

Used Sumitomo Excavator SH 330

Sumitomo excavator SH 330 in second hand can be available in a competitive price from us. It has a good engi...

Used Sumitomo Excavator SH330A3

Used Sumitomo Excavator SH330A3

Used Sumitomo excavator SH330A3 has an excellent working condition that it can serve the constructor with high ...

Used Sumitomo Excavator Bobcat337

Used Sumitomo Excavator Bobcat337

We are the main supplier of the used excavator,such as Used Sumitomo Excavator Bobcat337 and other products. Y...